BeBits - Ati Radeon Graphics Driver - Talkback

BeBits

Ati Radeon Graphics Driver

Talkback

Go back to the Ati Radeon Graphics Driver page

Post a new Talkback comment!

RE:Does it work in ZETA

By ModeenF - Posted on June 23, 2009 - 11:27:14 (#23191)
Current version when comment was posted: 5.1

Does it work in ZETA

By Dreamcast270mhz - Posted on June 18, 2009 - 10:15:36 (#23185)
Current version when comment was posted: 5.1

I'm running one of your supported cards, does it work in ZETA?

Tested with x850 XTP ( PE AGP )

By looncraz - Posted on January 9, 2009 - 21:59:10 (#23034)
Current version when comment was posted: 5.1

The ATI driver, compiled from Haiku sources, works very well with the x850 XTP ( Platinum Edition, on AGP ). No complaints other than a KDL with the radeon media_addon installed.

Haven't had a chance to properly test TV Out, but I will. Also haven't tested DVI...

--The loon

MD Releases Open-Source R600/700 3D Code

By AlienSoldier - Posted on December 30, 2008 - 13:32:38 (#23025)
Current version when comment was posted: 5.1

http://linux.slashdot.org/article.pl?sid=08/12/30/0337204

By ljr - Posted on December 30, 2008 - 09:33:22 (#23024)
Current version when comment was posted: 5.1

HD 2x00 seem to be RV600 chips and the current BeOS driver manages up to RV350... I don't think just injecting HD2400 pciids in detect.c will be suffisant but you can tried ....

By looncraz - Posted on December 29, 2008 - 22:02:10 (#23023)
Current version when comment was posted: 5.1

Just wondering if anyone knows how much effort it would be to get the HD2400 XT ( PCI-Express ) functional with this driver...

I just bought one, so I guess I'll have to make it work one way or another ( or bribe someone who could ).

--The loon

Ati Radeon Graphics Driver

By Bardulas - Posted on June 7, 2008 - 06:24:21 (#22835)
Current version when comment was posted: 5.1

http://ftp.beos.hu/drivers/video/Ati_Radeon_Graphics_Driver/

RadeonDriver_v5.1.pkg.zip

By Bardulas - Posted on June 1, 2008 - 13:02:24 (#22825)
Current version when comment was posted: 5.1

http://www.mediafire.com/?clxieoz2yxz

Can someone point me to a good link

By duda - Posted on June 1, 2008 - 10:19:24 (#22824)
Current version when comment was posted: 5.1

I tried a few links turned out to be unavailable.

Mobility Radeon X300

By Vlad5010 - Posted on April 19, 2008 - 19:19:18 (#22749)
Current version when comment was posted: 5.1

Does anyone know if this works with an ATI Mobility Radeon X300? I finally got everything up and running on BeOS except my graphics driver.

Thank the HEAVENS...7500 Mobility works with an older driver

By retrorandy - Posted on April 11, 2008 - 00:14:20 (#22700)
Current version when comment was posted: 5.1

It pays to dig through the old talk back posts. Thanks to kvdman for a post from 3 years ago! Now my 4 year old Compaq Evo can triple boot & correctly run BeOS, OS X x86, and Windows XP. Whoo Hoo!!

Here's a link to the old Radeon driver that worked for me.

http://users.telenet.be/zittergie/beosdrivers/video/video_ati.html#radeon

"By kvdman - Posted on June 20, 2005 - 01:06:14 (#16911)
Current version when comment was posted: 5.1
You might want to try uninstalling the new driver, and installing version 3.7 (I believe) or earlier. I have a Radeon 7500 and anything after v3.7 of his driver produces garbled withe stuff and snow on my screen including v5.3. I'm not sure if he had the card ids for your card in the version i'm using, but it's worth a try."

Wow, there's a lot of comments

By retrorandy - Posted on April 10, 2008 - 21:27:06 (#22698)
Current version when comment was posted: 5.1

I tried installing a few of the Radeon drivers. I'm pretty retarded so I think I did it right.

I have an ATI 7500 Radeon Mobility 32MB 4c57 in a Compaq Evo n6210 laptop. For me the screen comes up & I'm able to change resolutions, but there's a bunch of flashing lines all over the place. I think someone posted about it earlier.

It's almost like there's interference coming from somewhere, but that can't be the case in that the card works fine in OX X x86 and Windows XP. I installed BeOS Max V4.

Where and how?

By kraton. - Posted on January 4, 2008 - 04:10:32 (#22353)
Current version when comment was posted: 5.1

You'll find the most uptodate version of the radeon driver in my posts in the talkback. The driver is now maintained in the Haiku repository. It compiles for R5 / Zeta too.

I dont know where to find this talkback sorry.
For me I dont know how to use this repository. Or compile a driver...

New Ati Radeon Graphics Driver

By nutela - Posted on January 3, 2008 - 07:46:29 (#22351)
Current version when comment was posted: 5.1

Euan don't you want to setup a "New Ati Radeon Graphics Driver" page with a few links an up to date info?

I mean how do we want to attract users to BeOS' simplicity if this IMHO rather important drivers can't be downloaded normally?

Yup dead link city

By Euan - Posted on October 15, 2007 - 18:15:20 (#22014)
Current version when comment was posted: 5.1

I actually think it's a bug in the website script. But hey noone responds to my emails requesting it be fixed... Shame really.

You'll find the most uptodate version of the radeon driver in my posts in the talkback. The driver is now maintained in the Haiku repository. It compiles for R5 / Zeta too.

Any probs send me a mail.

Dud link city!

By dokV - Posted on October 15, 2007 - 12:06:01 (#22012)
Current version when comment was posted: 5.1

So out of the ten billion download links I counted two that actually seem link to the files in question. BTW will these work in DANO? Guess I'll find out..

Just out of curiosity (and I mean this in only the most polite way possible) does anybody do any maintenance of this site anymore?

What version does it say in the syslogs?

By Euan - Posted on October 5, 2007 - 15:42:46 (#21996)
Current version when comment was posted: 5.1

I'd imagine the versions are the same / close. This driver is now maintained in the Haiku source repository.

Radeon 8500 with Beos Max

By kraton. - Posted on October 1, 2007 - 12:41:52 (#21987)
Current version when comment was posted: 5.1

I use a Radeon 8500 (64 MB), PCI-ID 514c
The driver used in the newest Beos Max ver.4 b2 version is the fastest for me.
I am able to change teh wrokspaces very fast., which is not possible with the radeon driver I tried so far.

Which Version does he use? How to copy this driver to my Haiku system or to Zeta?

help needed

By automan - Posted on July 19, 2007 - 08:40:13 (#21827)
Current version when comment was posted: 5.1

i have a presario 2711AP machine. I have issues with the display, gardage seems to appear sometimes on my machine. is there any software to resolve this issue or any other solution. PLEASE HELP......

Wow, that's....

By -Meanwhile- - Posted on July 17, 2007 - 17:18:46 (#21823)
Current version when comment was posted: 5.1

...quite a wealth of download locations !

BeOS R5 + X850XT PE PCI-express: crash at boot

By Philippe Houdoin - Posted on June 27, 2007 - 06:29:07 (#21763)
Current version when comment was posted: 5.1

Hi Euan,

I've a new system with a Celeron 356 @ 3.3Ghz, 512 Mb or DDR2 and an Ati Radeon X850XT Platinium Edition on the first PCIe x16 port.

It crash at boot, on the last boot screen icon.
When I enable the syslog output, I can see it's due to Radeon driver. But I failed so far to find a way to capture this output, as at next (VESA) boot my /var/log/syslog don't contains anymore the previous boot lines, being truncated I guess.

I've installed the Haiku version of the Radeon driver to get X850 detection. Build on a BONE machine, for the "bone" build target. I've installed the cpu_fix to get clock and cpu detection corrected. I've NOT yet installed the 512M RAM boot limiter patch. And I've NOT yet installed the IRQ Sharing Fix (maybe it's related?).

Anyway, how I can grab the radeon log from the Haiku driver version? If I can't, should I retest with your latest driver version published on BeBits instead?

Thanks.

Re : ati x1300 driver problems

By etno - Posted on May 27, 2007 - 16:18:58 (#21679)
Current version when comment was posted: 5.1

hi, this is not a Windows driver

ati x1300 driver problems

By timsta - Posted on May 15, 2007 - 23:33:55 (#21654)
Current version when comment was posted: 5.1

i am having problems installing drivers for my new computer i have an x1300 card (x1300ge2-d3) and i was told i need to install .net framework 1.1 before it will accept the drivers i have done this and it has not worked i have formatted windows and tried without .net framework 1.1 and still nothing i also have onboard sound and net work that wont install its an asrock board but the drivers wont install for that either and other things that i cant find drivers for such as multimedia audio controller and pci bridge device, sm bus controller, video controller, video controller (vga compatible) one thing at a time though the video card oh and also its a pci-e (express) card 512mb hope you can help me

X300

By Euan - Posted on April 27, 2007 - 12:08:12 (#21608)
Current version when comment was posted: 5.1

Make sure you a symbolic link from /kernel/bin/radeon to /kernel/dev/graphics/radeon

Also make sure you don't have any other drivers installed.

If your using Zeta make sure you have the driver called radeon.driver (in the zeta package). And vice versa for R5

right or wrong

By micken - Posted on April 25, 2007 - 08:41:57 (#21594)
Current version when comment was posted: 5.1

I have tried to use the latest build posted here with my X300 card. I installed the driver , then removed the vesa configuration. But after that I only get a greyscale screen. Do I do something wrong ?

By Euan - Posted on April 6, 2007 - 08:46:56 (#21525)
Current version when comment was posted: 5.1

Hi Urias, yes just need complied binaries, as I can't run R5 on my desktop or laptop. replied to your email.

Just to update everyone the updated driver should support all cards upto X850, and the rebadged X1250s that are really X300 / X600 type devices. So that's R100 to R480 atchitectures, including RV types. Any other cards that are R520 generation or higher, EG X1300 and up are not supported.

Currently the driver doesn't like cards with dual DVI,the second output won't work in DVI-D mode. It may work if a VGA adapter is used. Also the backlight on some X-series laptops doesn't come on.

I'll make sure the 1440 modeline is in. I'm sure it is on the latest driver though.

By umccullough - Posted on April 3, 2007 - 20:30:52 (#21521)
Current version when comment was posted: 5.1

Euan,

Are you talking about simply compiling the Radeon driver from Haiku repo? If that is what you need, I can compile it for R5 (as I just did a few days ago myself without issues) and provide you with the jam package it produces.

Sikosis needs to get the build factory running again...

By makitka - Posted on April 2, 2007 - 16:27:59 (#21517)
Current version when comment was posted: 5.1

how about x-series?

New driver available soon

By Euan - Posted on April 2, 2007 - 16:08:25 (#21516)
Current version when comment was posted: 5.1

I fixed the issue of pc's crashing with R100 / R200 hardware IE less than Radeon 9500's. (see the haiku source) I also updated the hardware lists to all known supported hardware. I need someone to compile and test the R5 code, as none of my PCs will run BeOS, and Zeta is very unstable. :( If not I will get a version complied in a couple of weeks when compatible hardware is available. Sorry for the delay. :) Email me.

Driver for Radeon 9250 PCI (Card ID 5960)?

By homersapiens - Posted on March 26, 2007 - 15:43:05 (#21484)
Current version when comment was posted: 5.1

Which driver works with the Radeon 9250 PCI graphics card under BeOS 5.0.3 and Developer Edition 1.1?

I have the Diamond Multimedia version of the Radeon 9250 PCI card with 256 Megs video RAM. BeOS reports the Card ID as 5960.

I tried 'BeOS_Radeon_V5.1.6.1_Bin.zip', but no go.

The drivers from Zeta Neo, 1.2, 1.21 and 1.5 do work with this card, but under those operating systems only.

(I previously had a Sapphire Radeon 7000 PCI with 64 Megs of video RAM installed, which was compatible with all the Radeon driver versions.)

Any ideas?

Download buttons not working on this page?

By homersapiens - Posted on March 26, 2007 - 06:34:46 (#21479)
Current version when comment was posted: 5.1

When I click on any Download button in the 'Intel' section, it just takes me to the 'Submit User Link' form. Something's a little screwy.

X300 problems

By micken - Posted on March 23, 2007 - 17:56:59 (#21469)
Current version when comment was posted: 5.1

I have a X300 card that does not work with the current driver. The reported ID is 5b60 which is in the detect.c file. If I remove the vesa config file , the system boots to grey scale.

I must READ first then hack argh

By nutela - Posted on March 20, 2007 - 16:11:14 (#21449)
Current version when comment was posted: 5.1

It's all included LJR sorry I thought it was the same file which came with the radeon source.

Problem! Newer version do NOT support my radeon (7000-7500) whatever, I need (and might need the source as well of) some older version, I'll ask Thomas and Euan.

I could compile the 5.1 version from the first link after making BeIDE aware of some headers and other files. Wow BeIDE is a wonderfull tool almost never worked with it, never read any manual and I 'got it' quite fast! Marvelous.

What and where do I put the modelines?

By nutela - Posted on March 20, 2007 - 10:41:49 (#21447)
Current version when comment was posted: 5.1

I don't understand the modeline(?) method. I tried UMC (universal modeline calculator) from sourceforge but I didn't get the same results as are in the file. I think I tried every option in it but still.

Any info about this? Should all possible modelines be written in that ProposeDisplayMode.c file? I wonder why DDC doesn't work I'll try to compile the latest 5.1 from Tomas Kurschel (not Euan) and get it going.

By nutela - Posted on March 20, 2007 - 07:35:12 (#21444)
Current version when comment was posted: 5.1

What about DVI? This card (I think it's a Radeon 7000 or 7500 it has vga dvi and s-video out) doesn't even show bios messages on the dvi adapter :-/

But it works well other wise :-)

recompile the old driver

By ljr - Posted on March 20, 2007 - 06:56:27 (#21443)
Current version when comment was posted: 5.1

with a new ProposeDisplayMode.c .

http://ljr.free.fr/archives/dell8600c/ProposeDisplayMode.c

Good luck

Can't get widescreen resolution

By nutela - Posted on March 20, 2007 - 06:46:57 (#21442)
Current version when comment was posted: 5.1

I had to use an older driver version as well to get accelerated drawing as well.

What I can't get is DVI and wide screen resolution, the LCD panel is 1440x900 and the only options I get is all 4:3 resolutions till 1600x1200.

The driver version I use is from (11+12) Oct 2003! (From your betopenworld Euan)

Is it possible to use ATI Radeon X300?

By LarryStein - Posted on March 16, 2007 - 04:07:25 (#21434)
Current version when comment was posted: 5.1

I have to say, when I install BeOS, it uses a black and white display instead of color display. I found that the driver do not support X300 in the driver page, and I decided to have a try, but it didn't work.

Is it possible to do this?

No go on Phos

By nutela - Posted on March 15, 2007 - 06:47:43 (#21431)
Current version when comment was posted: 5.1

http://euank.users.btopenworld.com/beos/BeOS_Radeon_V5.1.6.1_Bin.zip

Deleted the original and I got a grayscale 640x480x8 bit screen, I'll try to compile the source from one of the newer src packages

By the_hUm - Posted on January 26, 2007 - 03:45:09 (#21244)
Current version when comment was posted: 5.1

I have the Radeon 9200 SE myself. It works like a charm here.

contact me on BeShare, IRC (irc.freenode.net #haiku)
nick=humungus and i'll send you my driver.



	Comment Pages: << prev \| 1 \| 2 \| 3 \| 4 \| 5 \| 6 \| 7 \| 8 \| 9 \| 10 \| 11 \| 12 \| 13 \| 14 \| 15 \| 16 \| 17 \| 18 \| 19 \| 20 \| 21 \| 22 \| 23 \| 24 \| 25 \| 26 \| next >>













			Recent Downloads - # 2 Total Downloads - # 2 Total Views - # 2 User Ratings - # 629




			Video Drivers




			1. BePodder - 9.80 2. QEMU - 9.67 3. ScummVM - 9.57 4. cpu_fix - 9.42 5. Jukebox - 9.40 6. Haiku AGP busm... - 9.35 7. vim6 - 9.31 8. Beezer - 9.26 9. HandBrake - 9.25 10. BeeF - 9.25




			1. Realtek RTL81... - 8,721 2. BeOS 5 Person... - 8,125 3. Ati Radeon Gr... - 7,713 4. ATI Rage 128... - 5,194 5. Ensoniq Audio... - 4,403 6. Broadcom 440x... - 3,168 7. USB Serial dr... - 3,095 8. USB Joystick... - 2,976 9. S3 Trio 64 v2... - 2,777 10. VLC Media Pla... - 2,676




			You are not logged in. Login


	Unless otherwise noted, everything is copyright © 1999-2009 BeBits. All Rights Reserved. For more legal trivia, take a gander at our Legal Stuff page and our Privacy Statement.