 |
 |
|
Ati Radeon Graphics Driver |
|
|
|
|
|
|
| Cant have USB enabled in bios? |
|
|
By jpfn - Posted on August 9, 2004 - 22:09:22 (#13797)
Current version when comment was posted: 5.0 |
|
|
Hello i have a P4 HyperThreading 3.0GHz on a motherboard with intel I875 chipset, a radeon 9700, a sata disk, a pata disk(this is where beos is installed).
And i cant use this driver if USB support is disabled completly from bios.
What does this driver have to do with USB ? and why isnt it working. When i use Vesa it works right away.
|
|
| To tuishimi |
|
|
By topical - Posted on August 2, 2004 - 14:39:54 (#13698)
Current version when comment was posted: 5.0 |
|
|
No you haven't FW enabled. Your chipset/graphics card only supports AGP 2x, whereas FW was introduced with AGP 4x.
|
|
| Ooops... |
|
|
By tuishimi - Posted on August 2, 2004 - 14:26:31 (#13696)
Current version when comment was posted: 5.0 |
|
|
I just now realized I posted this to the wrong product. Sorry. :/
|
|
| O.K. I am confused... |
|
|
By tuishimi - Posted on July 30, 2004 - 23:18:13 (#13668)
Current version when comment was posted: 5.0 |
|
|
...is this good or bad, and do I have FW? :/
KERN 'app_server'[25]: agp_drv V2: init_hardware called
KERN 'app_server'[25]: agp_man: bus module: init
KERN 'app_server'[25]: agp_man: found 2 AGP capable device(s)
KERN 'app_server'[25]: agp_drv V2: init_driver called
KERN 'app_server'[25]: agp_man: get_nth_agp_info called with index 0
KERN 'app_server'[25]: agp_man: get_nth_agp_info called with index 1
KERN 'app_server'[25]: agp_man: get_nth_agp_info called with index 2
KERN 'app_server'[25]: agp_drv V2: enabling AGP
KERN 'app_server'[25]: agp_man: enable_agp called
KERN 'app_server'[25]: agp_drv V2: AGP cmd readback: $1f000302.
KERN 'app_server'[25]: agp_drv V2: uninit_driver called
KERN 'app_server'[25]: Radeon - init_hardware: Version: 3.2.7.2
KERN 'app_server'[25]: Radeon - Radeon_FindRom: Signature: RG6
KERN 'app_server'[25]: Radeon - Radeon_FindRom: found ROM @0xc0000
KERN 'app_server'[25]: Radeon - Radeon_CardDetect: found supported device pci index 2, device 0x1002/0x5144
KERN 'app_server'[25]: Radeon - Radeon_FindRom: Signature: RG6
KERN 'app_server'[25]: Radeon - Radeon_FindRom: found ROM @0xc0000
KERN 'app_server'[25]: Radeon - Radeon_MapDevice:
KERN 'app_server'[25]: Radeon - Radeon_MapDevice: old PCI command state: 0x00000087
KERN 'app_server'[25]: Radeon - Radeon_MapDevice: physical address of memory-mapped I/O: 0xd6000000-0xd607ffff
KERN 'app_server'[25]: Radeon - Radeon_GetPLLInfo: ref_clk=2700, ref_div=60, xclk=16600, min_freq=12000, max_freq=35000 from BIOS
KERN 'app_server'[25]: Radeon - Radeon_GetMonType:
KERN 'app_server'[25]: Radeon - Radeon_GetMonType: BIOS reports CRT on primary and N/C on secondary port
KERN 'app_server'[25]: Radeon - Radeon_GetMonType: Effective routing: CRT on primary and N/C on secondary port
KERN 'app_server'[25]: Radeon - Radeon_DetectRAM: 32 MB DDR SGRAM found
KERN 'app_server'[25]: Radeon - Radeon_UnmapDevice:
KERN 'app_server'[25]: Radeon - probeDevice: found Radeon 7200 / Radeon / ALL-IN-WONDER Radeon; ASIC: r100
KERN 'app_server'[25]: Radeon - probeDevice: making /dev/graphics/1002_5144_010000
KERN 'app_server'[25]: Radeon - Radeon_ProbeDevices: 1 supported devices
KERN 'app_server'[25]: 3dfx_v4: init_hardware - Enter - PCI 3dfx-driver: May 26 2000 12:35:09
KERN 'app_server'[25]: +++ probe_devices: 0 supported devices
KERN 'app_server'[25]: +++ uninit_driver
KERN 'app_server'[25]: Radeon - Radeon_FindRom: Signature: RG6
KERN 'app_server'[25]: Radeon - Radeon_FindRom: found ROM @0xc0000
KERN 'app_server'[25]: Radeon - Radeon_MapDevice:
KERN 'app_server'[25]: Radeon - Radeon_MapDevice: old PCI command state: 0x00000086
KERN 'app_server'[25]: Radeon - Radeon_MapDevice: physical address of memory-mapped I/O: 0xd6000000-0xd607ffff
KERN 'app_server'[25]: Radeon - Radeon_GetPLLInfo: ref_clk=2700, ref_div=60, xclk=16600, min_freq=12000, max_freq=35000 from BIOS
KERN 'app_server'[25]: Radeon - Radeon_GetMonType:
KERN 'app_server'[25]: Radeon - Radeon_GetMonType: BIOS reports CRT on primary and N/C on secondary port
KERN 'app_server'[25]: Radeon - Radeon_GetMonType: Effective routing: CRT on primary and N/C on secondary port
KERN 'app_server'[25]: Radeon - Radeon_DetectRAM: 32 MB DDR SGRAM found
KERN 'app_server'[25]: Radeon - Radeon_UnmapDevice:
KERN 'app_server'[25]: Radeon - probeDevice: found Radeon 7200 / Radeon / ALL-IN-WONDER Radeon; ASIC: r100
KERN 'app_server'[25]: Radeon - probeDevice: making /dev/graphics/1002_5144_010000
KERN 'app_server'[25]: Radeon - Radeon_ProbeDevices: 1 supported devices
KERN 'app_server'[25]: Radeon - open_hook: name=graphics/1002_5144_010000, flags=2, cookie=0x013dda68
KERN 'app_server'[25]: Radeon - Radeon_MapDevice:
KERN 'app_server'[25]: Radeon - Radeon_MapDevice: old PCI command state: 0x00000086
KERN 'app_server'[25]: Radeon - Radeon_MapDevice: physical address of memory-mapped I/O: 0xd6000000-0xd607ffff
KERN 'app_server'[25]: Radeon - Radeon_MapDevice: restrict frame buffer from 0x 8000000 to 0x 2000000 bytes
KERN 'app_server'[25]: Radeon - Radeon_MapDevice: physical address of framebuffer: 0xd8000000-0xd9ffffff
KERN 'app_server'[25]: create_mtr(0x1a4, d8000000, 02000000, 1)
KERN 'app_server'[25]: Radeon - Radeon_MapDevice: mapped frame buffer @0x30400000
KERN 'app_server'[25]: Radeon - Radeon_InitDMA: Non-local memory 2000000@fe000000 (graphics card address)
KERN 'app_server'[25]: Radeon - createDMABuffer:
KERN 'app_server'[25]: Radeon - createDMABuffer: aligned_phys=0x02400000
KERN 'app_server'[25]: create_mtr(0x1a6, 02400000, 00080000, 1)
KERN 'app_server'[25]: destroy_mtr(0x1a6)
KERN 'app_server'[25]: create_area_gen error -2147483643 ( 0, 5, 1)
KERN 'app_server'[25]: create_mtr(0x1a7, 02400000, 00080000, 1)
KERN 'app_server'[25]: Radeon - initGART:
KERN 'app_server'[25]: Radeon - initGART: GART_ptr=0x32580000, GART_phys=0x02710000
KERN 'app_server'[25]: Radeon - Radeon_InitDMA: GART=0x32500000
KERN 'app_server'[25]: Radeon - mem_init: start=0, len=2000000, block_size=400, heap_entries=32768
KERN 'app_server'[25]: Radeon - open_hook: returning 0x00000000
KERN 'app_server'[25]: opening (generic) match file for /boot/beos/system/lib/libbe.so
KERN 'app_server'[25]: _ReservedDragger1__8BDragger patched to DragBitmap__8BDraggerP6BPointP12drawing_mode
KERN 'app_server'[25]: _ReservedSlider1__7BSlider patched to SetOrientation__7BSlider11orientation
KERN 'app_server'[25]: _ReservedSlider2__7BSlider patched to SetBarThickness__7BSliderf
KERN 'app_server'[25]: _ReservedSlider3__7BSlider patched to SetFont__7BSliderPC5BFontUl
KERN 'app_server'[25]: _ReservedHandler1__8BHandler patched to SendNotices__8BHandlerUlPC8BMessage
KERN 'app_server'[25]: 0 pair(s) found
KERN 'app_server'[25]: 5 pair(s) found
KERN 'app_server'[25]: Radeon - setupCPRegisters: CP buffer address=fe000000
KERN 'app_server'[25]: Radeon - setupCPRegisters: CP read pointer buffer==fe040000
KERN 'app_server'[25]: Radeon - setupCPRegisters: CP buffer size mask=15
KERN 'app_server'[25]: Radeon - SET_DISPLAY_MODE: width=1024, height=768
KERN 'app_server'[25]: Radeon - PROPOSE_DISPLAY_MODE: wished:
KERN 'app_server'[25]: Radeon - PROPOSE_DISPLAY_MODE: H: 1024 1040 1136 1312 (v=1024)
KERN 'app_server'[25]: Radeon - PROPOSE_DISPLAY_MODE: V: 768 769 772 800 (h= 768)
KERN 'app_server'[25]: Radeon - PROPOSE_DISPLAY_MODE: clk: 78750
KERN 'app_server'[25]: Radeon - PROPOSE_DISPLAY_MODE: got:
KERN 'app_server'[25]: Radeon - PROPOSE_DISPLAY_MODE: H: 1024 1040 1136 1312 (v=1024)
KERN 'app_server'[25]: Radeon - PROPOSE_DISPLAY_MODE: V: 768 769 772 800 (h= 768)
KERN 'app_server'[25]: Radeon - PROPOSE_DISPLAY_MODE: clk: 78750
KERN 'app_server'[25]: Radeon - SET_DISPLAY_MODE: independant ports: 1
KERN 'app_server'[25]: Radeon - SET_DISPLAY_MODE: scrolling disabled
KERN 'app_server'[25]: Radeon - mem_alloc: size=1024, tag=0x01495af8
KERN 'app_server'[25]: Radeon - mem_alloc: block_id=1, offset=0
KERN 'app_server'[25]: Radeon - mem_alloc: size=3145728, tag=0x01495af8
KERN 'app_server'[25]: Radeon - mem_alloc: block_id=2, offset=400
KERN 'app_server'[25]: Radeon - Radeon_CalcCRTCRegisters: crtc_pitch=128
KERN 'app_server'[25]: Radeon - Radeon_CalcPLLDividers: freq=7875
KERN 'app_server'[25]: Radeon - Radeon_CalcPLLDividers: dot_clock_freq=7875, pll_output_freq=15750, ref_div=60, feedback_div=350, post_div=2
|
|
| Radeon 9200 Mobility |
|
|
By idoc58 - Posted on July 29, 2004 - 20:21:58 (#13651)
Current version when comment was posted: 5.0 |
|
|
I too would like to see support for this chip beos pci id is 5c61 as indicated previously.
Thanks so much
|
|
| Beta-testing |
|
|
By Jerl1 - Posted on July 28, 2004 - 18:27:45 (#13635)
Current version when comment was posted: 5.0 |
|
|
If you need to do some beta testing I'm your man.
A+
Jérôme
|
|
| Radeon Mobility 9600 syslog sent |
|
|
By misza - Posted on July 28, 2004 - 14:04:44 (#13634)
Current version when comment was posted: 5.0 |
|
|
Hi Thomas,
I just sent a syslog to topical _a-t_ gmx.net . I sent one previously as well, is the above email working???
I'd love to get this 4e50 M10 mobility 9600 working!
Brent.
|
|
| Re: About the Mobility Radeon 9600 |
|
|
By topical - Posted on July 28, 2004 - 13:34:31 (#13633)
Current version when comment was posted: 5.0 |
|
|
Ups - just noticed that you were the guy that couldn't get a syslog. So: if there is _anyone_ having a Radeon Mobility 9600, please send me your syslog.
|
|
| Signal routing (was: 7500 Dual Display and TV-out trouble with 9100/8500) |
|
|
By topical - Posted on July 28, 2004 - 13:19:33 (#13631)
Current version when comment was posted: 5.0 |
|
|
All these problems stem from wrong signal routing (at least it looks like this). Currently, I'm rewriting the signal routing code hoping to fix these issues. Please give me some time until I have a stable state again.
|
|
| Re: About the Mobility Radeon 9600 |
|
|
By topical - Posted on July 28, 2004 - 13:14:29 (#13630)
Current version when comment was posted: 5.0 |
|
|
I added this card to the list, so it _should_ work, but obviously it doesn't. I reckon that the BIOS signature is still wrong, so I would need a syslog for verification and your graphics BIOS for the signature.
|
|
| ATI 8500 (64MB SGRAM) FW still dont work |
|
|
By kraton. - Posted on July 28, 2004 - 10:04:11 (#13624)
Current version when comment was posted: 5.0 |
|
|
I tried the new ATI Radeon Driver ver.5.0.
Everything is working, atleast i can enable/disable all options in the screen preferences panel without crashing the system. FW still dont work here...
As you know i use the radeon 8500 (64Mb Sgram).
I have to monitor out 1 normal and the other with DVI connector and a adapter for it.
I have a svhs out as well. Just for info...
The full syslog see down...
KERN 'app_server'[17]: Radeon - Radeon_DetectRAM: 64 MB DDR SGRAM found
KERN 'app_server'[17]: Radeon - Radeon_UnmapDevice:
KERN 'app_server'[17]: Radeon - probeDevice: found Radeon 8500 / 8500LE / ALL-IN-WONDER Radeon 8500; ASIC: r200
KERN 'app_server'[17]: Radeon - probeDevice: making /dev/graphics/1002_514c_010000
|
|
| About the Mobility Radeon 9600 |
|
|
By GenesisDH - Posted on July 28, 2004 - 02:21:37 (#13620)
Current version when comment was posted: 5.0 |
|
|
Did you by chance redefine the Mobility Radeon 9600 card ID 0x4e50 as a M10 in this release?
I ask that because I haven't been able to get a screen, the system hangs after the boot screen. It appears to hang at the detection of the video card, since I can get into a fail-safe color mode through the loader. FOr some odd reason, I cannot get syslog to keep track of the process of the booting.
The same result occurs regardless of whether or not I use a external monitor.
Thank you for working on the driver for people like me.
David Haas
|
|
| 7500 Dual Display |
|
|
By sewm - Posted on July 28, 2004 - 00:17:59 (#13616)
Current version when comment was posted: 5.0 |
|
|
Hello,
Great work on this driver.
With this new version I can boot with both monitors plugged in and turned on and now the display mirrors. With previous versions I would get the BeOS splash screen and then after that the monitors would stay black and nothing else would happen. I was able to reboot with CTRL+ALT+DEL but the same thing would happen.
Now that I can have both of them plugged in I can't seem to get combine displays to work. If I change it to Horizontal and click apply then both screens still show the same thing. However I can that it has stretched the screen to the size of two monitors because the time and deskbar replicants are no longer visible, and my wallpaper is centered and it shifts so that only half of it is visible.
Also I took a screen shot and then looked at it with combine turned off and it looks right. It's just that with combine turned on, both monitors show the left side, (or the right side it I say yes to "swap" displays")
Keep up the good work though.
-Sam
|
|
| Re: Ooops |
|
|
By topical - Posted on July 27, 2004 - 20:31:40 (#13614)
Current version when comment was posted: 5.0 |
|
|
Phew - at least some information I have is correct ;) Still, I would like to get your BIOS for verification. But I still have some questions: do you have Video-In? And: can you connect a second VGA monitor with an DVI2VGA adapter?
|
|
| Ooops |
|
|
By Jerl1 - Posted on July 27, 2004 - 20:24:15 (#13613)
Current version when comment was posted: 5.0 |
|
|
Sorry, you are right I have a rage Theatre, my card ID are 0x514d
Do you need Bios?
Jérôme
|
|
| To Jerl1 |
|
|
By topical - Posted on July 27, 2004 - 18:48:36 (#13612)
Current version when comment was posted: 5.0 |
|
|
Hm - this is strange. According to XFree86, your chip (it is has the PCI ID 514d, hasn't it?) is a r200. But, according to the documentation I have, the r200 has no built-in TV-Out unit, i.e. you would need a Rage Theatre for TV-Out. If you connect your card to the TV-set during boot, do you get a valid TV-signal during boot? If this is the case, I would like to have the BIOS of your graphics card (GetBIOS.zip is part of the source package), so I can have a look.
Thank you.
|
|
| Radeon 9100 |
|
|
By Jerl1 - Posted on July 27, 2004 - 18:30:32 (#13611)
Current version when comment was posted: 5.0 |
|
|
Hi,
My card doesn't have a rage theatre.
If you need more information about my card they me how get it and send it to you.
I just know that my card 9100 are just the new name for 8500LE, if that help you.
Cher
Jérôme
|
|
| About AGP |
|
|
By topical - Posted on July 27, 2004 - 16:01:38 (#13608)
Current version when comment was posted: 5.0 |
|
|
About the speed decrease e.g. in the case of zittergie: I suspect the AGP bus_manager is the reason, so please try removing it. To make it short: with the state of AGP support given, you gain only speed with the AGP bus_manager if FastWrites are enabled. Problem is: if they are enabled, the system gets often unstable. So, I asked Rudolf to disable them by default. This makes the system stable, but effectively makes the AGP bus_manager useless in the current state. Even worse: it seems that on some systems, the BIOS enables them by default (and I reckon that the BIOS only does that if it's safe, but I haven't yet gathered information about that), but the AGP bus_manager disables them (because it cannot know that they are safe with your motherboard/graphics card combination).
To summarize it: only use the AGP bus_manager if you want to _experimentally_ enable FastWrites.
|
|
| To Jerl1 |
|
|
By topical - Posted on July 27, 2004 - 14:57:19 (#13607)
Current version when comment was posted: 5.0 |
|
|
I don't exactly know which ASIC is used for Radeon 9100. It might be a r200 (at least the driver handles it as a r200), but I'm not sure. If it really is, there are the same problems as with Radeon 8500 (see the other post). So: does your card has a Rage Theatre on it?
|
|
| To zittergie |
|
|
By topical - Posted on July 27, 2004 - 14:54:36 (#13606)
Current version when comment was posted: 5.0 |
|
|
AFAIK Radeon 9000 is a Radeon 8500. I know that TV-Out is a bit different implemented there and thus makes trouble, but don't have presice information. Is this an AIW or VIVO card? More precisely: does it has a Rage Theatre chip on it? If yes, is TV-Out handled by it? Could you, to get precise information, send me your graphics card BIOS to have a look? Thank you.
|
|
| Re: REALLY bright display |
|
|
By topical - Posted on July 27, 2004 - 14:51:19 (#13605)
Current version when comment was posted: 5.0 |
|
|
How is your monitor connected? Do you use a DVI2VGA adapter?
|
|
| Thanks |
|
|
By Drake - Posted on July 27, 2004 - 12:49:07 (#13603)
Current version when comment was posted: 5.0 |
|
|
The work from people like you for the community at large is greatly appreciated.
|
|
| TV OUT |
|
|
By beosfrance - Posted on July 27, 2004 - 05:25:58 (#13597)
Current version when comment was posted: 5.0 |
|
|
Now it is ...isn't it ? ;)
|
|
| TV Out doesn't work for my Radeon 9100 |
|
|
By Jerl1 - Posted on July 26, 2004 - 23:23:25 (#13590)
Current version when comment was posted: 5.0 |
|
|
On my TV after the boot screen some "psychadelic" lines. But if I change Refresh rate the lines are different.
Format = Pal
size 1280*1024
refresh rate 60 hz
Do you need more information?
Thanks for your work
Jérôme
|
|
| Thanxs |
|
|
By zittergie - Posted on July 26, 2004 - 21:58:45 (#13588)
Current version when comment was posted: 5.0 |
|
|
Oh,
With that long syslog i forgot to thank you for your efforts.
Thanx
'BE the difference that makes a difference' - JEWEL
|
|
| TV Support |
|
|
By zittergie - Posted on July 26, 2004 - 21:57:20 (#13587)
Current version when comment was posted: 5.0 |
|
|
Hi,
I'm using a Radeon 9000 and since version 5.0 my television stays black (with the previous versions i got a 'rolling' screen). I'm using the PAL version and I don't get images via TV-out (In Windows everything works fine)
BTW something strange I found out:
With a previous version I think it was 3.2.7.3 I got more than 100 frames on teapot, with newer version I get merely 50 frames.
I've lost that version, if I find it back I verify this.
(I have already verified it in PHOS but the driver compiled for Phos doesn't seem to work on BeOS 5.0.3
BTW TV-out doesn't work on Phos too)
here's a snippet from my syslog (BeOS 5.0.3):
KERN 'app_server'[24]: agp_drv V2: init_hardware called
KERN 'app_server'[24]: agp_man: bus module: init
KERN 'app_server'[24]: agp_man: found 2 AGP capable device(s)
KERN 'app_server'[24]: agp_drv V2: init_driver called
KERN 'app_server'[24]: agp_man: get_nth_agp_info called with index 0
KERN 'app_server'[24]: agp_man: get_nth_agp_info called with index 1
KERN 'app_server'[24]: agp_man: get_nth_agp_info called with index 2
KERN 'app_server'[24]: agp_drv V2: enabling AGP
KERN 'app_server'[24]: agp_man: enable_agp called
KERN 'app_server'[24]: agp_man: max AGP 4x speed allowed (agp.settings)
KERN 'app_server'[24]: agp_man: blocking FW (agp.settings)
KERN 'app_server'[24]: agp_drv V2: AGP cmd readback: $1f000304.
KERN 'app_server'[24]: agp_drv V2: uninit_driver called
KERN 'app_server'[24]: Radeon - init_hardware: Version: 5.0.0.0
KERN 'app_server'[24]: Radeon - Radeon_FindRom: Signature: RADEON
KERN 'app_server'[24]: Radeon - Radeon_FindRom: found ROM @0xc0000
KERN 'app_server'[24]: Radeon - Radeon_CardDetect: found supported device pci index 20, device 0x1002/0x4966
KERN 'app_server'[24]: Radeon - init_driver:
KERN 'app_server'[24]: Radeon - Radeon_FindRom: Signature: RADEON
KERN 'app_server'[24]: Radeon - Radeon_FindRom: found ROM @0xc0000
KERN 'app_server'[24]: Radeon - Radeon_MapDevice: device: 020000
KERN 'app_server'[24]: Radeon - Radeon_MapDevice: old PCI command state: 0x00000087
KERN 'app_server'[24]: Radeon - Radeon_MapDevice: physical address of memory-mapped I/O: 0xe9000000-0xe900ffff
KERN 'app_server'[24]: Radeon - Radeon_GetPLLInfo: ref_clk=2700, ref_div=12, xclk=20000, min_freq=20000, max_freq=35000 from BIOS
KERN 'app_server'[24]: Radeon - Radeon_DetectRAM: 128 MB DDR SGRAM found
KERN 'app_server'[24]: Radeon - Radeon_UnmapDevice:
KERN 'app_server'[24]: Radeon - probeDevice: found Radeon 9000; ASIC: rv250
KERN 'app_server'[24]: Radeon - probeDevice: making /dev/graphics/1002_4966_020000
KERN 'app_server'[24]: Radeon - Radeon_ProbeDevices: 1 supported devices
KERN 'app_server'[24]: Radeon - uninit_driver:
KERN 'app_server'[24]: Radeon - init_driver:
KERN 'app_server'[24]: Radeon - Radeon_FindRom: Signature: RADEON
KERN 'app_server'[24]: Radeon - Radeon_FindRom: found ROM @0xc0000
KERN 'app_server'[24]: Radeon - Radeon_MapDevice: device: 020000
KERN 'app_server'[24]: Radeon - Radeon_MapDevice: old PCI command state: 0x00000086
KERN 'app_server'[24]: Radeon - Radeon_MapDevice: physical address of memory-mapped I/O: 0xe9000000-0xe900ffff
KERN 'app_server'[24]: Radeon - Radeon_GetPLLInfo: ref_clk=2700, ref_div=12, xclk=20000, min_freq=20000, max_freq=35000 from BIOS
KERN 'app_server'[24]: Radeon - Radeon_DetectRAM: 128 MB DDR SGRAM found
KERN 'app_server'[24]: Radeon - Radeon_UnmapDevice:
KERN 'app_server'[24]: Radeon - probeDevice: found Radeon 9000; ASIC: rv250
KERN 'app_server'[24]: Radeon - probeDevice: making /dev/graphics/1002_4966_020000
KERN 'app_server'[24]: Radeon - Radeon_ProbeDevices: 1 supported devices
KERN 'app_server'[24]: Radeon - open_hook: name=graphics/1002_4966_020000, flags=2, cookie=0x00e83eb8
KERN 'app_server'[24]: Radeon - Radeon_MapDevice: device: 020000
KERN 'app_server'[24]: Radeon - Radeon_MapDevice: old PCI command state: 0x00000086
KERN 'app_server'[24]: Radeon - Radeon_MapDevice: physical address of memory-mapped I/O: 0xe9000000-0xe900ffff
KERN 'app_server'[24]: Radeon - Radeon_MapDevice: physical address of framebuffer: 0xd8000000-0xdfffffff
KERN 'app_server'[24]: create_mtr(0x17a, d8000000, 08000000, 1)
KERN 'app_server'[24]: Radeon - Radeon_MapDevice: mapped frame buffer @0x30400000
KERN 'app_server'[24]: Radeon - createGARTBuffer:
KERN 'app_server'[24]: Radeon - initGATT:
KERN 'app_server'[24]: Radeon - initGATT: GATT_ptr=0x38500000, GATT_phys=0x02222000
KERN 'app_server'[24]: Radeon - Radeon_InitMemController: Graphics card address mapping:
KERN 'app_server'[24]: Radeon - Radeon_InitMemController: local memory 0x8000000@0xd8000000
KERN 'app_server'[24]: Radeon - Radeon_InitMemController: PCI GART 0x2000000@0x20000000
KERN 'app_server'[24]: Radeon - Radeon_InitMemController: disabled AGP GART 0x400000@0x22000000
KERN 'app_server'[24]: Radeon - Radeon_SetupIRQ: installed IRQ @ 11
KERN 'app_server'[24]: Radeon - Radeon_InitCP:
KERN 'app_server'[24]: Radeon - loadMicroEngineRAMData:
KERN 'app_server'[24]: Radeon - Radeon_ResetEngine:
KERN Last message repeated 1 times
KERN 'app_server'[24]: Radeon - initRingBuffer: CP buffer address=20000000
KERN 'app_server'[24]: Radeon - initRingBuffer: CP buffer size mask=10
KERN 'app_server'[24]: Radeon - initCPFeedback: CP read pointer buffer==20002000
KERN 'app_server'[24]: Radeon - Radeon_InitCP: bus_cntl=5133a3b0
KERN 'app_server'[24]: Radeon - Radeon_InitCP: Done
KERN 'app_server'[24]: Radeon - open_hook: returning 0x00000000
KERN 'app_server'[24]: opening (generic) match file for /boot/beos/system/lib/libbe.so
KERN 'app_server'[24]: _ReservedDragger1__8BDragger patched to DragBitmap__8BDraggerP6BPointP12drawing_mode
KERN 'app_server'[24]: _ReservedSlider1__7BSlider patched to SetOrientation__7BSlider11orientation
KERN 'app_server'[24]: _ReservedSlider2__7BSlider patched to SetBarThickness__7BSliderf
KERN 'app_server'[24]: _ReservedSlider3__7BSlider patched to SetFont__7BSliderPC5BFontUl
KERN 'app_server'[24]: _ReservedHandler1__8BHandler patched to SendNotices__8BHandlerUlPC8BMessage
KERN 'app_server'[24]: 0 pair(s) found
KERN 'app_server'[24]: 5 pair(s) found
KERN 'app_server'[24]: Radeon - Radeon_DetectTVOut:
KERN 'app_server'[24]: Radeon - Radeon_ReadEDID: Found DDC-capable monitor @0x0060
KERN 'app_server'[24]: Radeon - Radeon_DetectTV_RV200: Composite TV-Out is connected
KERN 'app_server'[24]: Radeon - Radeon_DetectDisplays: Detected monitors: 0x12
KERN 'app_server'[24]: Radeon - SET_DISPLAY_MODE: width=1024, height=768
KERN 'app_server'[24]: Radeon - Radeon_ReadEDID: Found DDC-capable monitor @0x0060
KERN 'app_server'[24]: Radeon - Radeon_DetectTV_RV200: Composite TV-Out is connected
KERN 'app_server'[24]: Radeon - Radeon_DetectDisplays: Detected monitors: 0x12
KERN 'app_server'[24]: Radeon - Radeon_SetupDefaultMonitorRouting: display_devices=12, whished_num_heads=1, use_laptop_panel=0
KERN 'app_server'[24]: Radeon - assignDefaultMonitorRoute: display_devices=12, whished_num_heads=1
KERN 'app_server'[24]: Radeon - assignDefaultMonitorRoute: CRTC1: 0x2, CRTC2: 0x10
KERN 'app_server'[24]: Radeon - Radeon_SetupDefaultMonitorRouting: CRTC1: 0x2, CRTC2: 0x10
KERN 'app_server'[24]: Radeon - PROPOSE_DISPLAY_MODE: got:
KERN 'app_server'[24]: Radeon - PROPOSE_DISPLAY_MODE: H: 1024 1072 1168 1376 (v=1024)
KERN 'app_server'[24]: Radeon - PROPOSE_DISPLAY_MODE: V: 768 769 772 808 (h= 768)
KERN 'app_server'[24]: Radeon - PROPOSE_DISPLAY_MODE: clk: 94500
KERN 'app_server'[24]: Radeon - SET_DISPLAY_MODE: independant heads: 2
KERN 'app_server'[24]: Radeon - SET_DISPLAY_MODE: scrolling disabled
KERN 'app_server'[24]: Radeon - SET_DISPLAY_MODE: frame buffer CPU-address=30410400, phys-address=d8010400
KERN 'app_server'[24]: Radeon - Radeon_CalcCRTCRegisters: crtc_pitch=128
KERN 'app_server'[24]: Radeon - Radeon_CalcPLLRegisters: freq=94500000
KERN 'app_server'[24]: Radeon - Radeon_CalcPLLRegisters: dot_clock_freq=94500000, pll_output_freq=283500000, ref_div=28, feedback_div=294, post_div=3
KERN 'app_server'[24]: Radeon - Radeon_ProgramCRTCRegisters:
KERN 'app_server'[24]: Radeon - Radeon_ProgramPLL:
KERN 'app_server'[24]: Radeon - Radeon_CalcTVParams: internal_encoder=yes, format=1
KERN 'app_server'[24]: Radeon - Radeon_MakeOverscanMode: got:
KERN 'app_server'[24]: Radeon - Radeon_MakeOverscanMode: H: 1024 1040 1064 1288
KERN 'app_server'[24]: Radeon - Radeon_MakeOverscanMode: V: 768 769 772 865
KERN 'app_server'[24]: Radeon - Radeon_MakeOverscanMode: clk: 66847200
KERN 'app_server'[24]: Radeon - Radeon_MatchCRTPLL: fixed post divider: 3
KERN 'app_server'[24]: Radeon - Radeon_MatchCRTPLL: frame_rate_drift=0, crt_freq=66728562, v_total=865, h_total=1287
KERN 'app_server'[24]: Radeon - Radeon_CalcTVParams: lines_before_active=27, start_line=482
KERN 'app_server'[24]: Radeon - Radeon_CalcTVParams: uv_inc=53989
KERN 'app_server'[24]: Radeon - Radeon_CalcTVRestart: f_first=0, v_first=862, h_first=9
KERN 'app_server'[24]: Radeon - Radeon_CalcTVRestart: first_num=1109455
KERN 'app_server'[24]: Radeon - Radeon_CalcTVRestart: time_to_active=74195, crt_freq=66728571, tv_freq=42954545
KERN 'app_server'[24]: Radeon - Radeon_CalcTVRestart: restart_to_first_active_pixel_to_FIFO=114956
KERN 'app_server'[24]: Radeon - Radeon_CalcTVRestart: after delay compensation first_num=994499
KERN 'app_server'[24]: Radeon - Radeon_CalcTVRestart: Restart in frame 0, line 772, pixel 935
KERN 'app_server'[24]: Radeon - Radeon_CalcTVFlickerFixer: flicker removal=5
KERN 'app_server'[24]: Radeon - Radeon_CalcTVFlickerFixer: 111724 < 16384 ?
KERN 'app_server'[24]: Radeon - Radeon_CalcCRTCRegisters: crtc_pitch=128
KERN 'app_server'[24]: Radeon - Radeon_CalcTVRegisters:
KERN 'app_server'[24]: Radeon - Radeon_CalcTVRegisters: tv_master_cntl=80000608
KERN 'app_server'[24]: Radeon - Radeon_ProgramCRTCRegisters:
KERN 'app_server'[24]: Radeon - Radeon_ProgramPLL:
KERN 'app_server'[24]: Radeon - Radeon_ProgramTVRegisters:
|
|
| REALLY bright display |
|
|
By hummin - Posted on July 26, 2004 - 20:59:18 (#13584)
Current version when comment was posted: 5.0 |
|
|
I've got a Radeon 9600 Pro card.. and since version 4+ of this driver, it makes my display go loco.. that is.. it becomes ULTRABRIGHT, and you can't tell mid-grey from white..
So I'm runnin on an old 3:ish version of the driver, for now.
Great work though!
|
|
| OT: IGP boot problem |
|
|
By wiese66 - Posted on July 26, 2004 - 20:07:00 (#13583)
Current version when comment was posted: 5.0 |
|
|
Hi,
I know this is not radeon specifc, but as long as here some IGP user, I hope that some maybe could help me.
My problem is that my laptop with igp chipset isn´t booting any BeOS/Zeta version (asus l4r series). I tried the different save mode options, but every time the debug output shows "sysinit1: 27" as the last line. Does some one has an idea what happen at that time? Or has someone even resolved this problem :-/?
Greetings
|
|
| ATI 8500 (64 MB SGRAM) |
|
|
By kraton. - Posted on July 23, 2004 - 17:58:39 (#13533)
Current version when comment was posted: 4.1.0.1 |
|
|
SGRAM not SDRAM sorry for that...
|
|
| ATI RADEON 8500 (64MB SDRAM) |
|
|
By kraton. - Posted on July 23, 2004 - 17:57:11 (#13532)
Current version when comment was posted: 4.1.0.1 |
|
|
Thanks thomas for you radeon driver ver 4.1 since it is working for me.
Anyway now with the Haiku AGP driver from rudolf, it should work but it wont.So I send you my syslogfile in the hope it is valuable for you.
The AGP driver works fine for me in VESA mode but it is not working with your drivers ;-(
Someone told in the tread that I should disable FW since it wont work with radeoncards. So is this true?
Thanks for your driver since ver 4.1 it is working fine.
KERN 'app_server'[17]: agp_man: bus module: init
KERN 'app_server'[17]: agp_man: found 2 AGP capable device(s)
KERN 'app_server'[17]: get_module(bus_managers/agp/v0): wake failed
KERN 'app_server'[17]: agp_drv V2: init_driver called
KERN 'app_server'[17]: agp_man: get_nth_agp_info called with index 0
KERN 'app_server'[17]: agp_man: get_nth_agp_info called with index 1
KERN 'app_server'[17]: agp_man: get_nth_agp_info called with index 2
KERN 'app_server'[17]: agp_drv V2: enabling AGP
KERN 'app_server'[17]: agp_man: enable_agp called
KERN 'app_server'[17]: agp_man: max AGP 4x speed allowed (agp.settings)
KERN 'app_server'[17]: agp_drv V2: AGP cmd readback: $1f000314.
KERN 'app_server'[17]: agp_drv V2: uninit_driver called
KERN 'app_server'[17]: kprof_load_image called way too early
KERN 'app_server'[17]: KERNEL: driver gx00.driver does not have wake_driver and suspend_driver
KERN 'app_server'[17]: kprof_load_image called way too early
KERN 'app_server'[17]: KERNEL: driver mga.driver does not have wake_driver and suspend_driver
KERN 'app_server'[17]: kprof_load_image called way too early
KERN 'app_server'[17]: KERNEL: driver radeon2 does not have wake_driver and suspend_driver
KERN 'app_server'[17]: Radeon - init_hardware: Version: 4.1.0.0
KERN 'app_server'[17]: Radeon - Radeon_FindRom: Signature: R200
KERN Last message repeated 2 times
KERN 'app_server'[17]: Radeon - Radeon_FindRom: found ROM @0xc0000
KERN 'app_server'[17]: Radeon - Radeon_CardDetect: found supported device pci index 2, device 0x1002/0x514c
KERN 'app_server'[17]: Radeon - init_driver:
KERN 'app_server'[17]: Radeon - Radeon_FindRom: Signature: R200
KERN Last message repeated 2 times
KERN 'app_server'[17]: Radeon - Radeon_FindRom: found ROM @0xc0000
KERN 'app_server'[17]: Radeon - Radeon_MapDevice: device: 010000
KERN 'app_server'[17]: Radeon - Radeon_MapDevice: old PCI command state: 0x00000087
KERN 'app_server'[17]: Radeon - Radeon_MapDevice: physical address of memory-mapped I/O: 0xe1000000-0xe100ffff
KERN 'app_server'[17]: Radeon - Radeon_GetPLLInfo: ref_clk=2700, ref_div=12, xclk=25000, min_freq=20000, max_freq=35000 from BIOS
KERN 'app_server'[17]: Radeon - Radeon_DetectRAM: 64 MB DDR SGRAM found
KERN 'app_server'[17]: Radeon - Radeon_UnmapDevice:
KERN 'app_server'[17]: Radeon - probeDevice: found Radeon 8500 / 8500LE / ALL-IN-WONDER Radeon 8500; ASIC: r200
KERN 'app_server'[17]: Radeon - probeDevice: making /dev/graphics/1002_514c_010000
KERN 'app_server'[17]: Radeon - Radeon_ProbeDevices: 1 supported devices
|
|
| usb |
|
|
By dudenz - Posted on July 23, 2004 - 16:28:07 (#13527)
Current version when comment was posted: 4.1.0.1 |
|
|
hi.
@Ilama:
I tried out your suggestion and dissabled the BIOS usb driver thing, but it didn't help.
I'm using BeOS R5.0.3 so it probably hasn't got the same problem with it as Dano or Zeta has.
any new ideas? ;-)
regards
dudenz
|
|
| correction |
|
|
By llama - Posted on July 23, 2004 - 14:11:11 (#13525)
Current version when comment was posted: 4.1.0.1 |
|
|
Actually as SD pointed out in the agp talkback it isn't legacy usb, but rather a usb "disk" driver that lets you boot off usb floppy drives and mass storage. That's the setting I turned off in bios, not sure how common it is... But it would appear that dano (and therefor Zeta/PhOS) has issues with this driver and usb. ymmv.
Cheers,
llama
|
|
| IGP now working! |
|
|
By llama - Posted on July 23, 2004 - 13:43:29 (#13521)
Current version when comment was posted: 4.1.0.1 |
|
|
It turns out disabling legacy usb support in bios fixed the crashing problem. dudenz, see if that works for you too! Now I can finally try out some games :-)
Thankyou Thomas!
Cheers,
llama
|
|
| another try |
|
|
By dudenz - Posted on July 23, 2004 - 00:31:46 (#13513)
Current version when comment was posted: 4.1.0.1 |
|
|
well, unfortunately nothing changed for me.
the driver you send me to test, didn't work, as you predicted...
I also tried the fake driver v2 with the agp busmanager, but nothing there too... too bad.
well, then i wait how your driver is performing with the troubled radeon 9600, as you said.
thanks again anyways.
regards,
dudenz
|
|
| ATI Radeon Mobility 9200 |
|
|
By stonewolfsoft - Posted on July 22, 2004 - 19:29:19 (#13508)
Current version when comment was posted: 4.1.0.1 |
|
|
Thomas, Any chance you can add the above card to the list, BeOS lists the card as ID 5c61.
Many Thanks
Simon
|
|
| AGP busmanager fake_drv V2 IGP fix |
|
|
By rudolfc - Posted on July 22, 2004 - 16:33:25 (#13507)
Current version when comment was posted: 4.1.0.1 |
|
|
Hi,
I just removed the V1 fakedriver, and added a V2 fakedriver in the AGP busmanager download.
ATI IGP users that did not have a working system with Thomas his ATI driver and the module/fake_driver before, are strongly encouraged to try the V2 fake_driver! At least, I'd like to know if this gets more IGP users a working system...
Please let me know if it helps!!
(The V1 driver aborted as soon as it saw that the first found AGP device was already setup for AGP: assuming that all other devices would be in the same state. As we now know ATI fails to do that, so the V2 driver checks ALL devices before aborting now, making sure ALL devices get enabled.)
Rudolf.
|
|
| RE: fire gl |
|
|
By dudenz - Posted on July 21, 2004 - 22:16:40 (#13491)
Current version when comment was posted: 4.1.0.1 |
|
|
hi.
I just send you an email.
regards,
dudenz
|
|
| Re: Fire GL |
|
|
By topical - Posted on July 20, 2004 - 20:59:08 (#13467)
Current version when comment was posted: 4.1.0.1 |
|
|
Thanks for the report. It seems that the agp bus_manager doesn't do anything useful in your case :(
In terms of linux: could you ask him which driver he uses (hopefully not the closed-sourced version of ATI). And could I also get the X6R11 log of him?
Thank you
|
|
| ati fire gl and AGP busmanager - 2 |
|
|
By dudenz - Posted on July 20, 2004 - 20:22:02 (#13466)
Current version when comment was posted: 4.1.0.1 |
|
|
hi.
as suggested I experimented with the agp.setting file.
now here is the outcome:
***
max_speed >1; block_agp false; block_sba false; block_fw false: the system stops booting after highlighting the last symbol on the bootscreen. so there is just die usual bootscreen to see with all symbols highlighted, but there is nothing happening.
***
max_speed 1; rest like above: screen gets scrambled.
(see here: http://i08fs1.atis-stud.uni-karlsruhe.de/~s_puls/gesamt.jpg )
***
block_agp true; rest doesn't matter: screen gets scrambled as well.
***
block_agp false; block_sba true; block_fw true: screen gets scrambled, too. (max_speed didn't matter)
***
the interessting thing is: on the scrambled screen there are few word to read now. "Cancel Shutdown" and "Kill Application" as you can see here:
http://i08fs1.atis-stud.uni-karlsruhe.de/~s_puls/links.jpg
http://i08fs1.atis-stud.uni-karlsruhe.de/~s_puls/rechts.jpg
I really don't know why. but there is still no syslog entry from those boots. I wander why.
I hope it helps somehow anyways.
no, I haven't tried linux yet, but i know one how did/does. have you got any special questions I shell ask?
thanks again for your efforts. and thanks to Rudolf as well.
dudenz
|
|
| Re: radeon9600 rt_m10 |
|
|
By emwe - Posted on July 20, 2004 - 19:52:12 (#13464)
Current version when comment was posted: 4.1.0.1 |
|
|
If you need someone for testing, I do have somebody "on the line" with an 0x4e50. So when you have made the necessary changes, I'd dearly like to test the modified driver. You can mail it to "dev AATT m-phasis DDOOTT de".
Thanks in advance!
Michael
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
 |
| |
Recent Downloads - # 2
Total Downloads - # 2
Total Views - # 2
User Ratings - # 629
|
|
|
|
 |
| |
Video Drivers
|
|
|
|
 |
|
1. BePodder - 9.80
2. QEMU - 9.68
3. ScummVM - 9.57
4. cpu_fix - 9.42
5. Jukebox - 9.40
6. libdl.so - 9.40
7. Haiku AGP busm... - 9.35
8. vim6 - 9.31
9. Beezer - 9.26
10. HandBrake - 9.25
|
|
|
|
 |
|
1. BeOS 5 Perso... - 13,599
2. Realtek RTL8... - 13,114
3. Ati Radeon G... - 12,582
4. Ensoniq Audio... - 7,565
5. ATI Rage 128... - 7,442
6. USB Joystick... - 5,663
7. Broadcom 440x... - 5,411
8. S3 Trio 64 v2... - 4,726
9. USB Serial dr... - 4,707
10. Intel Extreme... - 4,468
|
|
|
|
 |
| You are not logged in.
Login
|
|
|
|
 |
|
