 |
|
| SIS |
|
|
By timpanic - Posted on May 24, 2003 - 18:08:41 (#7412)
Current version when comment was posted: 1.6 |
|
|
Thx for the work on that driver !
On my Elitegroup p4S5A Mainboard there is also a SIS AC97 Chipset but the Line IN and CD IN still does not exist after installing the driver..Hope that someday I can record with beos...Allthough beos was made for proffessional audio editing I´m still not able to record anything....
|
|
| I love you |
|
|
By Androo - Posted on May 24, 2003 - 17:52:51 (#7411)
Current version when comment was posted: 1.6 |
|
|
nForce2 workin' perfectly
|
|
| Intel 8280 does not work |
|
|
By hitech - Posted on March 31, 2003 - 11:55:49 (#6671)
Current version when comment was posted: 1.5 |
|
|
Anyone have any suggestions how can I bring to life my onboard Intel 8280 (ICH2) sound device? The board is D845WN, the full name of the device is Intel 82801BA I/O Controller Hub (ICH2).
|
|
| Working NForce2 |
|
|
By HippYBouH - Posted on March 24, 2003 - 05:35:02 (#6552)
Current version when comment was posted: 1.5 |
|
|
Great !! Thanks, work fine
|
|
| nForce2 audio works well |
|
|
By zenja - Posted on March 23, 2003 - 22:21:45 (#6545)
Current version when comment was posted: 1.5 |
|
|
Thanks Marcus for your efforts in updating the driver to support nForce2 chipsets. My Abit NF7-S can now play sound. C'mon everyone, donate a few dollars to show your support.
|
|
| Audio quality |
|
|
By Jess - Posted on March 23, 2003 - 19:53:09 (#6538)
Current version when comment was posted: 1.5 |
|
|
First off I'd like to thank you for your work on this.
Secondly I'd like to say I gotta shut down & put my sound
card back in. The audio quality is pretty harsh still...
at least on an SIS735. Dunno how it is on the other chipsets.
So Deskbar > Shutdown > Here_I_Come!
|
|
| nVIDIA nForce2 support |
|
|
By MarcusOverhagen - Posted on March 23, 2003 - 03:53:34 (#6533)
Current version when comment was posted: 1.4 |
|
|
nVIDIA nForce2 support was added and is beeing tested.
An update will be released tomorrow.
|
|
| asking for realtek ALC650 support |
|
|
By oco - Posted on March 19, 2003 - 00:42:13 (#6454)
Current version when comment was posted: 1.4 |
|
|
My motherboard has a Realtek ALC650 audio codec (AC97). The current driver doesn't support it. How difficult it is to add support for it in the next release ?
Specs are available at http://www.realtek.com.tw.
A linux driver (with source code) is also available at the same web site.
|
|
| 8280 AC 97 Sound card |
|
|
By CERBERUSS - Posted on March 17, 2003 - 17:09:00 (#6425)
Current version when comment was posted: 1.4 |
|
|
i've downloaded this drivers, but it seems it won't work with my sound card... i have 8280 AC'97... where can i find that driver?
|
|
| bah |
|
|
By Jess - Posted on March 15, 2003 - 18:46:22 (#6400)
Current version when comment was posted: 1.4 |
|
|
Ac97 means nothing. Billions of chips are ac97 & in the end your not gonna see jack for anything nCrapia uh I mean nVidia makes cuz they wont give spec for anyone to make drivers for it. nVidia sucks
|
|
| I need a driver... |
|
|
By _JuDgEn_ - Posted on March 15, 2003 - 16:30:44 (#6398)
Current version when comment was posted: 1.4 |
|
|
I rally need a nVIDIA MCP driver. (nFORCE2) It is supposed to be an AC97 but it doesent work.
|
|
| VT82C686A / VIA support |
|
|
By logic9 - Posted on February 8, 2003 - 19:59:10 (#5814)
Current version when comment was posted: 1.4 |
|
|
I have a VT82C686A in my laptop as well and the "ICH AC97 Driver" doesnt support VIA AC97. I tried to email the author to see if he would be willing to provide me with the source so I could "attempt" to add support for VIA's super southbridge chipset, but my email was bounced because his inbox is full. I realize that via's implementation of the AC Link commands may be quite a bit different but I'd like to give it a whirl. so if anyone knows the author or has the source to the driver I'd appreciate getting the source / info passed along to me.
|
|
| VIA 'AC97 |
|
|
By aultl - Posted on October 31, 2002 - 04:17:36 (#3875)
Current version when comment was posted: 1.4 |
|
|
I have never installed BeOs before today. I downloaded PE 5 and upgraded to 5.0.3 and have no problem with my Via sound card. I also have a BT878 Video capture card and it works without me adjusting any settings either.
|
|
| First you need to get install BeOS and then get rid of Windoze ME. |
|
|
By scottmc - Posted on October 28, 2002 - 17:08:18 (#3836)
Current version when comment was posted: 1.4 |
|
|
http://www.bebits.com/app/2680
|
|
| WindowsME |
|
|
By Intelinside - Posted on October 28, 2002 - 11:30:05 (#3831)
Current version when comment was posted: 1.4 |
|
|
Windows ME is to dumb to run Posix shell scripts
|
|
| This is a BeOS only website, sorry |
|
|
By korli - Posted on October 28, 2002 - 11:04:54 (#3830)
Current version when comment was posted: 1.4 |
|
|
WinMe is supported by your product vendor.
|
|
| How to install AC97 driver ? |
|
|
By rudi-swiss - Posted on October 26, 2002 - 00:10:25 (#3788)
Current version when comment was posted: 1.4 |
|
|
Tried to run the install.sh script as told in the readme file, but Windows-ME does not recognize the .sh extention.
Am I stupid, or can you give me a clue to proceed ?
Thanx in advance,
Rudi
|
|
| SiS 635t |
|
|
By Cutty201 - Posted on September 14, 2002 - 00:39:39 (#3140)
Current version when comment was posted: 1.4 |
|
|
Hey there, I wanted to ask if you have any idea why these ICH drivers wont work for me, I have a SiS 635T chipset with SiS 7012 onboard sound, I install the drivers, and when I go to set "AC 97 (ICH)" to the input, It isn't there. What do i do?
|
|
| via chipset |
|
|
By prampo - Posted on September 10, 2002 - 20:33:42 (#3094)
Current version when comment was posted: 1.4 |
|
|
I really hope once an intrepid developer would develope an audio driver for via ac'97/realtek alc201.
|
|
| Jess... you've been busy |
|
|
By looncraz - Posted on August 30, 2002 - 21:44:31 (#2921)
Current version when comment was posted: 1.4 |
|
|
Geez... Jess...
You have been working overtime in the forums, I see!
Of course, I was that way at one time.. until I became TOO 'popular'. A 100 fan e-mails a day was a little akward. Anyway, I'm kinda glad that phase is over...
--The loon
|
|
| While you probably wont do anythign silly like this... |
|
|
By Jess - Posted on August 30, 2002 - 16:15:37 (#2919)
Current version when comment was posted: 1.4 |
|
|
While you probably wont do anything silly like this...
Uh I was being funny. I plainly state that I do not have any more advice & cracking & rewiring the amp & speaker section was silly. While it SHOULD be common knowledge that we dont have to state every post to email the author some of us have become null to that idea since we'll email an author & never get a response. Sad but true.
|
|
| Talkback and emails and dual outputs |
|
|
By MarcusOverhagen - Posted on August 30, 2002 - 14:46:10 (#2917)
Current version when comment was posted: 1.4 |
|
|
The correct fix for problems like those of adamk is not to open the laptop and change wires.
The best way is to email the author of the driver and kindly ask if the problems can be fixed.
I already have enabled an additional aux output in the driver, but not published it yet, because only one person has tested it. There are also unresolved problems with enabling/disabling an external amplifier in notebooks, because I rarely get feedback telling me if a change I made really helped.
So please, contact me by email, tell me what doesn't work, and I can send you something to test that my resolve those problems.
|
|
| ahh! |
|
|
By Jess - Posted on August 29, 2002 - 19:05:48 (#2905)
Current version when comment was posted: 1.4 |
|
|
Well then the fix is easy! Open the puppy up & wire your speakers to the same connections as the head phones ;)or just run some wire from the head phone jack internaly to the speakers. While you probably wont do anythign silly like this if you DO you probably want to make a switch as once you plug the head phones in with out a switch it will run head phones & speakers. This means if your using head phones to be quiet it's a lost cause & also the OHM impedance my suck your volume down to nill. Other then the physical jerry rig I'm out... heh the hack'n slash is the only thing I can think of anyway.
- Jess
|
|
| Should have been clearer... |
|
|
By adamk - Posted on August 29, 2002 - 18:41:21 (#2904)
Current version when comment was posted: 1.4 |
|
|
The Presario 2700 is a laptop, so it comes with built in speakers.... :-)
Adam
|
|
| Your "dual" outputs |
|
|
By Jess - Posted on August 29, 2002 - 18:23:45 (#2903)
Current version when comment was posted: 1.4 |
|
|
Hey I'm not framiliar with the system your using but I have a question for you. You say the audio only goes to your head phones & no the speakers. This makes me wonder if you have 2 audio outs. If so BeOS will only use one so you have to pick one or the other. Another funny thign would be that you dont have 2 audio outs but still have to devices plugged into it. heh. But there are alot of possibilites... you could also have a speaker set that has a head phone jack on them. blablabla lots of possibilities but make sure you have things plugged in & remember you can select only one out - 'specially with such a new driver all the features will not be intact or solid
- Jess
|
|
| Audio through headphones only. |
|
|
By adamk - Posted on August 29, 2002 - 17:59:16 (#2900)
Current version when comment was posted: 1.4 |
|
|
FYI,
The driver seems to work pretty well on my Compaq Presario 2700. The only issue is that all the audio is output through my headphones, and nothing goes to the speakers. In addition, there doesn't seem to be anything on the mixer would would seem to remedy this problem.
Does anyone have a suggestion?
Adam
|
|
| BeBits Staff plea |
|
|
By Jess - Posted on August 29, 2002 - 17:41:09 (#2899)
Current version when comment was posted: 1.4 |
|
|
Hey all BeBits staff!!! heh PLEASE add a disclaimer on the main page & possibly in the scheme that denotes how each apps page is set up to clearly say not for windows or only for the Be OS. It's great we get the exposuer from searches when people are looking for drivers but this help with windows crap is getting really tire some. We could ignore it but while we semi flood our own talkback sections with flames & This is not for windows messages, even if we gave no response to these questions at all, we are still getting quite a large number of them so maybe we need to make BeBits a tad more clear about it's content & purpose. This is horribly worded but you get the picture. How about using the lame old joke that I used in my last post... "BeBits - Uh we don't do Windows... Software for the BeOS"
|
|
| jhbelish (whatever..) |
|
|
By looncraz - Posted on August 29, 2002 - 16:34:48 (#2898)
Current version when comment was posted: 1.4 |
|
|
You should run BeOS. Then run the DOS emulator from here on BeBits (not sure of name).
It has sound, and interfaces with the world's fastest multimedia system (BeOS Media Kit). And of course, we have the driver for your 'card' ;-)
You can download BeOS for free, from here. It is a *MERE* 45MB download!! Though with Be's awesoem technologies (now PalmSource's) it expands to over 500MB! Installing inside either Linux, MacOS, or Windows.. there is no need to repartition. With WinME you will need to make a boot floppy (done during install).
HardwareCompatibilityList:
http://frizbe.net/
Good Luck!
|
|
| Sorry we dont do Windows |
|
|
By Jess - Posted on August 29, 2002 - 16:06:46 (#2897)
Current version when comment was posted: 1.4 |
|
|
Well the title pretty much says it. This is site is for BeOS & we dont help with Linux windows Qnx or any other os unless in a strange occasion
|
|
| AC97 in DOS?? |
|
|
By jhbellsh - Posted on August 29, 2002 - 15:43:57 (#2896)
Current version when comment was posted: 1.4 |
|
|
I've been trying to find a device driver for my Intel AC97 which I wish to use in DOS. I have an MSI 6339 motherboard with the built-in chipset. I've considered looking into using workarounds by using high-compatibility SB drivers, or maybe a generic MPU401 driver. I'm using Windows ME, which I've used to create a boot disk to allow access to DOS. I've also considered using a DOS emu through Linux, which may be a possibility? I've searched high and low for a compatible driver so if anyone knows of one, or is capable of compiling a driver I'd appreciate any nudges in the right direction!
|
|
| Working Perfectly on Intel ICH4 845G |
|
|
By IBeDuke - Posted on August 20, 2002 - 03:14:06 (#2740)
Current version when comment was posted: 1.4 |
|
|
Very nice piece of work. Running perfectly on Socket 478 Chaintech 9BIF mainboard (with Intel 845G onboard chipset, ICH4).
|
|
| But it's very useful though :) |
|
|
By mahen - Posted on August 2, 2002 - 23:01:55 (#2499)
Current version when comment was posted: 1.1 |
|
|
Thanks for your work BTW :)
|
|
| Not for me :( |
|
|
By mahen - Posted on August 2, 2002 - 23:00:24 (#2498)
Current version when comment was posted: 1.1 |
|
|
Personnally, no difference.
On my duron 1000, it still takes 15% to play
a mp3 (including all services and the player),
and the sound still sounds like "downsampled"...
(ess 732 / 7012 - elite k7s5a)
|
|
| about the new version |
|
|
By atryu - Posted on August 1, 2002 - 23:13:25 (#2484)
Current version when comment was posted: 1.1 |
|
|
It is faster now. For playing musique with CL-amp it tooks me 3.3% of CPU activity for CL-amp itself and 2.6% for the media service (1.4 for the driver and 1.2 for the mixer).
My CPU is an Athlon TBird 900MHz with 256Mo PC100.
So welldone your driver is so helpful...
|
|
| Sound quality |
|
|
By mahen - Posted on July 25, 2002 - 22:48:16 (#2365)
Current version when comment was posted: 1.0 |
|
|
It's me again :)
I've noticed a bit more precisely the other issue
(apart from the problem of speed) : it seems
lower frequencies are especially distorted
(like downsampled).
Anyways it's extremely visible on certain types of
musics, but much less on others...
Has anyone noticed that ?
|
|
| re about your config |
|
|
By atryu - Posted on July 24, 2002 - 15:49:01 (#2347)
Current version when comment was posted: 1.0 |
|
|
I don't know, I've told what I can see on my computer, I will examin the % of CPU usage tonight more precisly.
Can you tell me how to do the samething as you did.
reply by email, it will be more correct not replying on this talkback, this is not the purpose now.
@+
|
|
| some more details about my speed problem (duron 1000, PE) |
|
|
By mahen - Posted on July 24, 2002 - 14:19:34 (#2346)
Current version when comment was posted: 1.0 |
|
|
For instance, on a duron 1000 mhz, when I play
a mp3 with APlayer, 15 % of the CPU is used
according to top :
259 286.55 190.00 95.00 5.7 APlayer Ringbuffer fille
184 133.56 70.00 62.00 2.7 media_addon_serv AC97 (ICH) contr
175 119.43 60.00 58.00 2.4 media_addon_serv BMixer::MixThrea
4 60.33 0.00 60.00 1.2 kernel_team kernel_daemon
167 33.49 3.00 29.00 0.7 Pulse w>Pulse
257 30.46 19.00 11.00 0.6 APlayer APlayer SoundPla
74 14.77 2.00 12.00 0.3 Tracker Tracker
282 8.01 1.00 6.00 0.2 top top
44 6.96 3.00 3.00 0.1 registrar timer_thread
118 6.94 4.00 2.00 0.1 Deskbar w>Deskbar
254 6.66 4.00 2.00 0.1 APlayer w>APlayer
32 6.34 3.00 2.00 0.1 app_server Updater
249 4.12 2.00 1.00 0.1 app_server w:APlayer:66
88 4.02 2.00 1.00 0.1 Tracker w>Desktop
166 3.82 2.00 1.00 0.1 app_server w:Pulse:63
37 3.27 2.00 0.00 0.1 registrar _roster_thread_
271 3.06 2.00 0.00 0.1 app_server w:Terminal 1:67
218 2.66 1.00 0.00 0.1 Tracker w>donnees2
272 2.60 1.00 0.00 0.1 Terminal Terminal 1
252 2.58 1.00 1.00 0.1 APlayer Tip handling
235 2.46 1.00 0.00 0.0 Tracker w>Aphex Twin - W
134 1.84 1.00 0.00 0.0 net_server net_server
------ 753.00 390.00 362.00 15.1% TOTAL (84.9% idle time, 0.0% unknown)
It seems really really abnormal !!
5% CPU consumption with no program.
Under Linux / windowmaker : 0% with no program
About 0.5% with xmms (mp3 player)
|
|
| re K7S5A |
|
|
By atryu - Posted on July 24, 2002 - 14:13:08 (#2345)
Current version when comment was posted: 1.0 |
|
|
You cannot have no program running, there must be some stuff running in the back.
In my case the CPU activity was quite high and the sound not very clear when I was under BeOS DevEd 5.0.4 but since I am under PhOS, I have no pb (the activity is very low, so normal and don't bother my othre apps now, so it is ok for me).
I can't tell if the first problem (not perfect sound, too high CPU usage) came from the driver or other problem.
Since this is ok now I assume the drivers are very good and works perfectly for me. I think the problem comes from elsewhere.
btw PhOS is the new name for superDANO. It is release (illegal btw) derivated from DANO with more stability and comptability. Have a look here http://looncraz.tripod.com/phos. You will have information on what is phos. You can download it in beshare (from me for example when I'm online).
I had some difficulties with the IDE driver, but since it is ok for me I think it is the best versoin of BeOS, it is nice to use, stable and for the first time I can watch my DVD with a DVD quality, watch my divx, it has BONE... great release
|
|
| re ECS K7S5A |
|
|
By mahen - Posted on July 24, 2002 - 11:38:33 (#2343)
Current version when comment was posted: 1.0 |
|
|
What is phOS ?
Can you just do a 'top' under the shell
with no program running and tell me the %cpu
used, to compare with me ?
In my case (duron 1000) with NO program active
it varies from 4.5 to 7% !!
Thanks for the answers !!
- mahendra
|
|
| re...ECS K7S5A |
|
|
By atryu - Posted on July 24, 2002 - 07:17:33 (#2341)
Current version when comment was posted: 1.0 |
|
|
Yes of course I'm using it on my Elite Motherboard.
But I have to admit that now it works just well. I've just installed phOS with the driver for my soundchipset and it works well, no CPU overload, no little sound, it is ok now
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
 |
| |
Recent Downloads - # 134
Total Downloads - # 13
Total Views - # 8
User Ratings - # 622
|
|
|
|
 |
| |
Audio Drivers
|
|
|
|
 |
|
1. BePodder - 9.80
2. QEMU - 9.68
3. ScummVM - 9.57
4. cpu_fix - 9.42
5. Jukebox - 9.40
6. libdl.so - 9.40
7. Haiku AGP busm... - 9.35
8. vim6 - 9.31
9. Beezer - 9.26
10. HandBrake - 9.25
|
|
|
|
 |
|
1. BeOS 5 Perso... - 13,618
2. Realtek RTL8... - 13,122
3. Ati Radeon G... - 12,590
4. Ensoniq Audio... - 7,572
5. ATI Rage 128... - 7,443
6. USB Joystick... - 5,665
7. Broadcom 440x... - 5,415
8. S3 Trio 64 v2... - 4,730
9. USB Serial dr... - 4,709
10. Intel Extreme... - 4,473
|
|
|
|
 |
| You are not logged in.
Login
|
|
|
|
 |
|
